Luxlighting Technology Private Limited
Chattarpur, New Delhi, Delhi
GST No. 07AADCL2486K1Z7
TrustSEAL Verified
Call 07942829887 64% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
| Country of Origin | Made in India |
Features:
1. Microprocessor Control for temperature, made in the India.
2. The Embedding Module and Cryo Module can be assembled freely
3. Flexible heating mechanism, Dual-protection; Safe, Reliable and
Energy-Saving
4. Fully programmable computer controls allow automatic system start
and stop anytime within a week
5. Automatic Memory and Restoration: After start, all preset temperature
data are automatically stored.
6. Paraffin Chamber, Paraffin Dispenser, Left and Right Thermal Storage
Compartments, and Heating Plate (working area) are individually controlled
Optional:
8. LuxMed -TEI Cooling Plate:
9. Working Temp.: RT-40℃, Temp. can not be adjustable. The lowest can be -30℃.
10. Working Size: 320*300mm
Specifications of Paraffin Dispensing Unit
1. Capacity of paraffin Tank between 3-5 litres.
2. Capacity of Thermal Chambers for storage of molds: min 1.8 litres.
3. Temp. Range of paraffin Tank: 50-70° C.
4. Temp. Range of thermal chamber: 50-70° C.
5. Temp. Range of Hot plates & forceps wells: 50-70° C
6. Embedding Station have a connection for electrically heated forceps.
7. Embedding Station have six heated wells for normal forceps 3 on either side of the
wax dispensing line.
8. Embedding Station have Precisely metered and adjustable gravity feed paraffin
dispenser to deliver the right amount of paraffin.
9. Embedding Station have both finger touch plate and foot switch for control of paraffin flow.
10. Embedding Station have a large warm working surface on either side for min 10
cassettes on each side.
11. Embedding Station have dor matrix 7 segment display.
12. Embedding Station have a Magnifying lens adjustable In any position, large
13. Cold spot & illumination for specimen orientation.
Specifications of Cold Console
1. Capacity of freezing up to 60 blocks at a time.
2. Temp. Range of cold plate: 0-120C, adjustable in steps of 10 C.
3. Compressor to be extra quiet to reduce noise fatigue.
4. Cold Console can work independently without switching on dispensing console.
5. The system Work on 220-240 V,50 Hz. and use CFC free gas and the
having ISO certification.
6. Standard supply with 1000 Nos. Plastic Embedding Rings for making paraffin blocks.
7. LuxMed will provides all Certificate of calibration and inspection.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 100.2 x 120 cm |
| Country of Origin | Made in India |
LuxMed® tissue embedding station for precise orientation for sectioning of tissue samples.
Ergonomic Design:
A spacious work surface, easy access to waste drawers, and intuitive controls to enhance user experience and workflow with integrated solutions.
1. Heated Working Surface.
2. Forceps Warmer.
3. Cold Plate temp upto -20°C.
4. Paraffin Dispensing System.
5. Mold Warmer.
6. Temperature Control with 7 days profile timer and delay.
7. Waste Drawer.
8. Illumination.
LuxMed® tissue embedding station is primarily used to prepare tissue samples for microscopic analysis by embedding them in a solidifying medium like paraffin wax. This process allows for precise orientation and sectioning of the tissue into thin slices for further examination. The station is crucial in histology and pathology labs, ensuring tissues are properly prepared for diagnosis and research.
Here's a more detailed explanation of the uses:
The core function of a tissue embedding station is to create a solid block of tissue embedded in paraffin wax. This block can then be sliced very thinly by a microtome, and the resulting sections are mounted on slides for staining and microscopic analysis.
The embedding process allows for precise orientation of the tissue within the wax block. This is crucial for ensuring that specific regions of interest within the tissue are included in the sections and can be properly examined.
Tissue embedding stations provide standardized protocols and controlled environments for embedding various tissue types. This helps to minimize artifacts and distortions that can occur during tissue preparation, ensuring accurate and reliable results.
Tissue embedding stations are essential tools in both histology and pathology labs. In histology, they are used for routine tissue processing for diagnostic purposes. In pathology, they are crucial for preparing tissue samples for research, drug development, and other scientific studies.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
| Country of Origin | Made in India |
Tissue Embedding System, Embedding Station, Wax Despenser, Histology Cold plate, Cold plate, Tissue Embedding Center; Lab Tissue Embedding Systems; Tissue Processing, Embedding and Sectioning; Tissue Embedding & Cooling System; Tissue Embedding; Embedding Workstation; Embedding Centers; Tissue Embedding Station; Paraffin Embedding Machine; Tissue Embedding System , Laboratory Tissue Embedder
;
LuxMed® Tissue Embedding System is used to encase tissue samples in paraffin wax, enabling thin slicing for microscopic examination.
A tissue embedding station is primarily used to prepare tissue samples for microscopic analysis by embedding them in a solidifying medium like paraffin wax, allowing for precise orientation and sectioning of the tissue into thin slices for further examination under a microscope, typically in histology and pathology laboratories; essentially, it creates tissue blocks for analysis by embedding processed tissue within a mold filled with melted paraffin wax that then cools and solidifies around the tissue.
Key functions of a tissue embedding station:
· Precise tissue orientation: Allows for careful placement of the tissue within the mold to ensure the desired sectioning plane is achieved.
· Temperature control: Maintains optimal temperature for melting and solidifying the embedding medium (like paraffin).
· Cooling plate: Rapidly cools the paraffin block after embedding to solidify the tissue.
· Paraffin dispensing: Provides a controlled way to dispense molten paraffin onto the tissue.
· Mold storage: Holds tissue cassettes and molds during the embedding process.
· Applications of tissue embedding stations:
· Medical diagnosis: Examining tissue biopsies for disease detection in pathology laboratories.
· Research studies: Analyzing tissue samples for cellular and molecular characteristics in biomedical research.
· Forensic analysis: Examining tissue samples for forensic investigations
Design Idea's
A tissue embedding station is designed to encase tissue samples in paraffin wax, which allows for thin slicing for microscopic examination.
Features
· Temperature control: Allows for precise temperature adjustment from ambient to 99℃
· Working surface: Spacious working surface that can accommodate multiple samples being processed simultaneously
· Lighting: LED upper lighting system to illuminate and aid in the precise positioning of small tissue samples.
· Cold plate: Cools the tissue block
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
| Model Name/Number | LM-ES-LD-2024-D |
| Country of Origin | Made in India |
Features:
1. Microprocessor Control for temperature, made in the India.
2. The Embedding Module and Cryo Module can be assembled freely
3. Flexible heating mechanism, Dual-protection; Safe, Reliable and
Energy-Saving
4. Fully programmable computer controls allow automatic system start
and stop anytime within a week
5. Automatic Memory and Restoration: After start, all preset temperature
data are automatically stored.
6. Paraffin Chamber, Paraffin Dispenser, Left and Right Thermal Storage
Compartments, and Heating Plate (working area) are individually controlled
Optional:
8. LuxMed -TEI Cooling Plate:
9. Working Temp.: RT-40℃, Temp. can not be adjustable. The lowest can be -30℃.
10. Working Size: 320*300mm
Specifications of Paraffin Dispensing Unit
1. Capacity of paraffin Tank between 3-5 litres.
2. Capacity of Thermal Chambers for storage of molds: min 1.8 litres.
3. Temp. Range of paraffin Tank: 50-70° C.
4. Temp. Range of thermal chamber: 50-70° C.
5. Temp. Range of Hot plates & forceps wells: 50-70° C
6. Embedding Station have a connection for electrically heated forceps.
7. Embedding Station have six heated wells for normal forceps 3 on either side of the
wax dispensing line.
8. Embedding Station have Precisely metered and adjustable gravity feed paraffin
dispenser to deliver the right amount of paraffin.
9. Embedding Station have both finger touch plate and foot switch for control of paraffin flow.
10. Embedding Station have a large warm working surface on either side for min 10
cassettes on each side.
11. Embedding Station have dor matrix 7 segment display.
12. Embedding Station have a Magnifying lens adjustable In any position, large
13. Cold spot & illumination for specimen orientation.
Specifications of Cold Console
1. Capacity of freezing up to 60 blocks at a time.
2. Temp. Range of cold plate: 0-120C, adjustable in steps of 10 C.
3. Compressor to be extra quiet to reduce noise fatigue.
4. Cold Console can work independently without switching on dispensing console.
5. The system Work on 220-240 V,50 Hz. and use CFC free gas and the
having ISO certification.
6. Standard supply with 1000 Nos. Plastic Embedding Rings for making paraffin blocks.
7. LuxMed will provides all Certificate of calibration and inspection.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
Tissue Embedding System, Embedding Station, Wax Despenser, Histology Cold plate, Cold plate, Tissue Embedding Center; Lab Tissue Embedding Systems; Tissue Processing, Embedding and Sectioning; Tissue Embedding & Cooling System; Tissue Embedding; Embedding Workstation; Embedding Centers; Tissue Embedding Station; Paraffin Embedding Machine; Tissue Embedding System , Laboratory Tissue Embedder
;
LuxMed® Tissue Embedding System is used to encase tissue samples in paraffin wax, enabling thin slicing for microscopic examination.
A tissue embedding station is primarily used to prepare tissue samples for microscopic analysis by embedding them in a solidifying medium like paraffin wax, allowing for precise orientation and sectioning of the tissue into thin slices for further examination under a microscope, typically in histology and pathology laboratories; essentially, it creates tissue blocks for analysis by embedding processed tissue within a mold filled with melted paraffin wax that then cools and solidifies around the tissue.
Key functions of a tissue embedding station:
· Precise tissue orientation: Allows for careful placement of the tissue within the mold to ensure the desired sectioning plane is achieved.
· Temperature control: Maintains optimal temperature for melting and solidifying the embedding medium (like paraffin).
· Cooling plate: Rapidly cools the paraffin block after embedding to solidify the tissue.
· Paraffin dispensing: Provides a controlled way to dispense molten paraffin onto the tissue.
· Mold storage: Holds tissue cassettes and molds during the embedding process.
· Applications of tissue embedding stations:
· Medical diagnosis: Examining tissue biopsies for disease detection in pathology laboratories.
· Research studies: Analyzing tissue samples for cellular and molecular characteristics in biomedical research.
· Forensic analysis: Examining tissue samples for forensic investigations
Design Idea's
A tissue embedding station is designed to encase tissue samples in paraffin wax, which allows for thin slicing for microscopic examination.
Features
· Temperature control: Allows for precise temperature adjustment from ambient to 99℃
· Working surface: Spacious working surface that can accommodate multiple samples being processed simultaneously
· Lighting: LED upper lighting system to illuminate and aid in the precise positioning of small tissue samples.
· Cold plate: Cools the tissue block
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
| Country of Origin | Made in India |
Features:
1. Microprocessor Control for temperature, made in the India.
2. The Embedding Module and Cryo Module can be assembled freely
3. Flexible heating mechanism, Dual-protection; Safe, Reliable and
Energy-Saving
4. Fully programmable computer controls allow automatic system start
and stop anytime within a week
5. Automatic Memory and Restoration: After start, all preset temperature
data are automatically stored.
6. Paraffin Chamber, Paraffin Dispenser, Left and Right Thermal Storage
Compartments, and Heating Plate (working area) are individually controlled
Optional:
8. LuxMed -TEI Cooling Plate:
9. Working Temp.: RT-40℃, Temp. can not be adjustable. The lowest can be -30℃.
10. Working Size: 320*300mm
Specifications of Paraffin Dispensing Unit
1. Capacity of paraffin Tank between 3-5 litres.
2. Capacity of Thermal Chambers for storage of molds: min 1.8 litres.
3. Temp. Range of paraffin Tank: 50-70° C.
4. Temp. Range of thermal chamber: 50-70° C.
5. Temp. Range of Hot plates & forceps wells: 50-70° C
6. Embedding Station have a connection for electrically heated forceps.
7. Embedding Station have six heated wells for normal forceps 3 on either side of the
wax dispensing line.
8. Embedding Station have Precisely metered and adjustable gravity feed paraffin
dispenser to deliver the right amount of paraffin.
9. Embedding Station have both finger touch plate and foot switch for control of paraffin flow.
10. Embedding Station have a large warm working surface on either side for min 10
cassettes on each side.
11. Embedding Station have dor matrix 7 segment display.
12. Embedding Station have a Magnifying lens adjustable In any position, large
13. Cold spot & illumination for specimen orientation.
Specifications of Cold Console
1. Capacity of freezing up to 60 blocks at a time.
2. Temp. Range of cold plate: 0-120C, adjustable in steps of 10 C.
3. Compressor to be extra quiet to reduce noise fatigue.
4. Cold Console can work independently without switching on dispensing console.
5. The system Work on 220-240 V,50 Hz. and use CFC free gas and the
having ISO certification.
6. Standard supply with 1000 Nos. Plastic Embedding Rings for making paraffin blocks.
7. LuxMed will provides all Certificate of calibration and inspection.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 59.9 x 80 x 120 cm |
Tissue Embedding System, Embedding Station, Wax Despenser, Histology Cold plate, Cold plate, Tissue Embedding Center; Lab Tissue Embedding Systems; Tissue Processing, Embedding and Sectioning; Tissue Embedding & Cooling System; Tissue Embedding; Embedding Workstation; Embedding Centers; Tissue Embedding Station; Paraffin Embedding Machine; Tissue Embedding System , Laboratory Tissue Embedder
;
LuxMed® Tissue Embedding System is used to encase tissue samples in paraffin wax, enabling thin slicing for microscopic examination.
A tissue embedding station is primarily used to prepare tissue samples for microscopic analysis by embedding them in a solidifying medium like paraffin wax, allowing for precise orientation and sectioning of the tissue into thin slices for further examination under a microscope, typically in histology and pathology laboratories; essentially, it creates tissue blocks for analysis by embedding processed tissue within a mold filled with melted paraffin wax that then cools and solidifies around the tissue.
Key functions of a tissue embedding station:
· Precise tissue orientation: Allows for careful placement of the tissue within the mold to ensure the desired sectioning plane is achieved.
· Temperature control: Maintains optimal temperature for melting and solidifying the embedding medium (like paraffin).
· Cooling plate: Rapidly cools the paraffin block after embedding to solidify the tissue.
· Paraffin dispensing: Provides a controlled way to dispense molten paraffin onto the tissue.
· Mold storage: Holds tissue cassettes and molds during the embedding process.
· Applications of tissue embedding stations:
· Medical diagnosis: Examining tissue biopsies for disease detection in pathology laboratories.
· Research studies: Analyzing tissue samples for cellular and molecular characteristics in biomedical research.
· Forensic analysis: Examining tissue samples for forensic investigations
Design Idea's
A tissue embedding station is designed to encase tissue samples in paraffin wax, which allows for thin slicing for microscopic examination.
Features
· Temperature control: Allows for precise temperature adjustment from ambient to 99℃
· Working surface: Spacious working surface that can accommodate multiple samples being processed simultaneously
· Lighting: LED upper lighting system to illuminate and aid in the precise positioning of small tissue samples.
· Cold plate: Cools the tissue block
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | LuxMed |
| Country of Origin | Made in India |
LuxMed® Tissue Processor , Automatic Tissue Processor, Carousel or Rotary Dip and Dunk processors
LuxMed® tissue processor is a laboratory instrument used to prepare tissue samples for microscopic examination. It automates the steps of fixation, dehydration, clearing, and infiltration, which are crucial for preserving tissue structure and making it suitable for sectioning and staining. These instruments are essential for histopathology, pathology research, and other fields requiring detailed tissue analysis.
LuxMed® Tissue-transfer (dip and dunk) processors, also known as carousel or rotary processors, are automated tissue processors that move tissue samples, held in baskets, between different reagent baths. These processors are a type of "open" processor, meaning the tissue is exposed to the environment during reagent changes. They are commonly used in histology labs for preparing tissue samples for microscopic examination.
Advantages:
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | LuxMed |
| Country of Origin | Made in India |
LuxMed® Tissue Processor , Automatic Tissue Processor, Carousel or Rotary Dip and Dunk processors
LuxMed® tissue processor is a laboratory instrument used to prepare tissue samples for microscopic examination. It automates the steps of fixation, dehydration, clearing, and infiltration, which are crucial for preserving tissue structure and making it suitable for sectioning and staining. These instruments are essential for histopathology, pathology research, and other fields requiring detailed tissue analysis.
LuxMed® Tissue-transfer (dip and dunk) processors, also known as carousel or rotary processors, are automated tissue processors that move tissue samples, held in baskets, between different reagent baths. These processors are a type of "open" processor, meaning the tissue is exposed to the environment during reagent changes. They are commonly used in histology labs for preparing tissue samples for microscopic examination.
Advantages:
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | LuxMed |
| Country of Origin | Made in India |
LuxMed® - Tissue Processor
This instrument is an essential component of the Histology Laboratory. The main goal of tissue processing is to remove any water present in the tissues and replace the water with a medium that will adequately support and solidify the tissue making it possible to cut thin sections on the microtome.
LuxMed® - A tissue processor is a device used in histology and pathology labs to prepare tissue samples for microscopic analysis and diagnosis. The main purpose of a tissue processor is to remove water from the tissue and replace it with a medium that will solidify it, making it possible to cut thin sections for examination.
Here are some uses of a tissue processor:
Additional Information: