Microcontroller Board

Product Details:

Description:

Microprocessor Controller based with Jumbo LCD Display, Menu Control, automatic operation and alarm system, have the following menu:
• Customized Specification will be available as per OEM manufacturer.
• Ergonomic Display and Touch Button Control.
• Set Time And Read Time Display.
• Set Temperature And Read Temperature Display.
• Automatic Timer Startup Up After The Set Temperature Achieved.
• System OFF after time is completed.
• Temperature range 1.0 to 99.9 DegC.
• Settable High/ Low Buzzer Alarm.
• Settable Compressor Delay.
• Selectable Communication - Printer, CFR/PC, USB Storage.
• Failure and events detection for Sensor fail, Door open,
• Power Failure, Temperature variations.
• Sensor type - PT-100 , 3 Wire , R WW. 

Product Details:

Description:

• Blood Bank Refrigerator
• Technology Solution
• Last Mile Delivery of Vaccines
• Managing, Cold Chain Efficiently
• Storage of Vaccines
• Automatic Co2 Injection and Control with Battery Backup.
• Settable Off-Set to provide freedom for temperature calibration.
• Settable Cascade Temperature.
•  Settable Temperature Alarm: High / Low.

Microprocessor Controller based with Jumbo LCD Display, Menu Control, automatic operation and alarm system, have the following menu: 
• Designed for Lock 2 to 8 Degc operation.
• Advance and Settable - Defrost System.• Temperature range - 30.0 to 70.0 DegC.
• Settable Hight Low Buzzer Alarm.
• Settable Compressor Delay.
• Selectable Communication - Printer, CFR/PC, USB Storage.
• Failure and events detection for Sensor fail, Door open, Power Failure, Temperature variations.
• Sensor type - PT-100, 3 Wire, R WW.
• Customized Specification will be available as per OEM manufacturer.
• Ergonomic Display and Touch Button Control.
• Set Time And Read Time Display.
• Set Temperature And Read Temperature Display.
• Automatic Timer Startup Up After The Set Temperature Achieved.
• System Off after time is completed.

Product Details:

Desription:

• Technology Solution
• Last Mile Delivery of Vaccines
• Managing, Cold Chain Efficiently
• Storage of Vaccines
• Automatic Co2 Injection and Control with Battery Backup.
• Settable Off-Set to provide freedom for temperature calibration.
• Settable Cascade Temperature.
• Settable Temperature Alarm: High / Low.

Microprocessor Controller based with Jumbo LCD Display, Menu Control, automatic operation and alarm system, have the following menu:
• Customized Specification will be available as per OEM manufacturer.
• Ergonomic Display and Touch Button Control.
• Temperature range -99 to +99 DegC
.• Advance automatic Cascade and Cabinet compressor temperature configuration.
• Settable Co2 Injection temperature range.
• Complete kit of Co2 backup system available, 1. Dc12v Solenoid valve,2. Battery backup System (24Hr).
• Settable High/Low Buzzer Alarm & Settable Compressor Delay.
• Selectable Communication - Printer, CFR/PC, USE Storage.
• Failure and events detection for Sensor fail, Door open,Power Failure, Temperature variations.
• Sensor type - PT-100, 3 Wire, R WW.

Product Details:

Stability (Humidity) Chamber Controller
Microprocessor Controller based with Jumbo LCD Display, Menu Control, automatic operation, and alarm system, have the following Menu • Customized Specification will be available as per OEM manufacturer.• Ergonomic Display and Touch Button Control.• Set Time And Read Time Display.• Set Temperature And Read Temperature Display.• Automatic Timer Startup Up After The Set Temperature Achieved.• System OFF after time is completed.• Temperature range 1.0 to 99.9 DegC.• Settable High Low Buzzer Alarm & Settable humidity.• Selectable Communication - Printer, CFR/PC, USB Storage.• Failure and events detection for Sensor fail, Door open, Power Failure, Temperature variations.• Settable RPM and motor control.• Integrated function for heating, cooling, and humidity control.• Light Function Control - 25% , 50%, 75% and 100%, Selectable.

Product Details:

Laminar Air Flovv Controller with Differential Sensor 
Sensor cost Extra - Buy Online from Luxmed

Laminar Air Flovv Controller with Differential Sensor • Password (Programmable) for Authorized Operation.• Built in differential Pressure display (mm WC / Pascal).• Air Velocity Display and setthe safety parameters.• Initial Self Cleaning Cycle.• Real Time Clock.• UV Timer.• Total UV used Time.• Total HEPA Filter run time.• HEPA Filter Alarm after programmed hours with ON/OFF.• HEP A Filter life display and alarm. Etc.

Product Details:

Incubator/ Water bath Controller
Microprocessor Controller based with FND/LED Display, Menu Control, automatic operation and alarm system, have the following Menu Controlled Features: • Customized Specification will be available as per OEM manufacturer.• Ergonomic Display and Touch Button Control.• SET TIME and READ TIME Display.• SET TEMPERATURE and READ TEMPERATURE display.• Automatic Timer Startup up after the SET TEMPERATURE achieved.• System OFF after time is completed.• Temperature range 0.1 to +99.0 DegC.• Settable High/Low Buzzer Alarm.• Selectable Communication - Printer, CFR/PC, USB Storage.• Failure and events detection for Sensor fail, Door open, Power Failure, Temperature variations.• Sensor type - PT-100, 3 Wire, R WW.• Built-in low water cut system and indication.Etc.

Product Details:

BOD Incubator Controller - BOD014
Microprocessor Controller based with Jumbo LCD Display, Menu Control, automatic operation and alarm system, have the following Menu • Customized Specification will be available as per OEM manufacturer.• Ergonomic Display and Touch Button Control.• Set Time And Read Time Display.• Set Temperature And Read Temperature Display.• Automatic Timer Startup Up After The Set Temperature Achieved.• System OFF after time is completed.• Temperature range 1.0 to 99.9 DegC.• Settable High/ Low Buzzer Alarm.• Settable Compressor Delay.• Selectable Communication - Printer, CFR/PC, USB Storage.• Failure and events detection for Sensor fail, Door open,• Power Failure, Temperature variations.• Sensor type - PT-100 , 3 Wire , R WW.

Product Details:

Biosafety Controller with Air Velocity and Differential Pressure • Password (Programmable) for Authorized Operation.• Built in differential Pressure display (mm WC I Pascal).• Air Velocity Display and set the safety parameters.• Initial Self Cleaning Cycle.• Real Time Clock.• UV Timer.• Total UV used Time.• Total HEPA Filter run time.• HEPA Filteprogrammed hours with ON/OFF etc

Product Details:

Biological Safety Controller
Biosafety  Controller , Biological Safety Controller  Clean Room Controller Fully Automatic with Motor Control

All Sensors and Motor Controller  cost Extra - Buy Online from Luxmed
Biosafety Cabinet / Laminar flow hoods / PCR Workstation are monitored with LuxMed® to ensure the critical ISO 5 environment is maintained. LuxMed® microprocessor controller, standard on all laminar flow hoods, workstations, and enclosures, provides user-friendly monitoring and control features. The LuxMed"' controller constantly monitors the HEPA filter to ensure proper airflow. Proper airflow is critical in maintaining a clean working environment. If the workstation is equipped with an ultraviolet energy source, the LuxMed"' controller monitors the effectiveness of the bulb and alerts the operator when replacement is necessary. 
Monitoring and Control: (Airflow, Differential Pressure, Temperature) - constantly monitors airflow and displays the actual instantaneous face velocity on an alphanumeric display. The controller uses a special sensor developed by LuxMed"' which, unlike traditional anemometers, poses no safety threat to the operator.LCD Display for simultaneously displaying inflow, down flow, airflow status, and filter life & UV timer. Digital read-out with alpha-numeric display shall indicate all input, status, and alarm functions. Automatic/Manual Setting - In automatic mode the unit is set to maintain a constant face velocity. In manual mode the face velocity is controlled by the operator.Gas Detection/Filter Monitor - A solid state electronic gas detector warns the user of filter breakthrough.Timer - A digital countdown lab event timer may be preset by the operator and used to time general lab functions.AUX Control - Any 110V 10 amp or 220V 5-amp device may be connected and powered on and off via the safety controller. This is particularly useful for switched outlets or transfer devices (requires configuration at purchase).UV Light - The UV  Light may be directly controlled by pressing the quick key button.Model: • Dual Sensor (Duo)Single Sensor (Uni)Without SensorBlower Regulation & Control

Product Details:

Description:

Microprocessor Controller based with LCD Display, Menu Control, automatic operation, and alarm system, have the following menu:
• Ergonomic Display and Touch Button Control.
• SET TIME and READ TIME Display
.
• SET TEMPERATURE and READ TEMPERATURE display.
• Automatic Timer Startup up after the SET TEMPERATURE is achieved.
• System OFF after time is completed.
• Temperature range lDegC. to +330 DegC.
• Settable High/Low Buzzer Alarm.
• S2lectable Communication - Printer, CFR/PC, USB Storage.
• File and events detection for Sensor fail, Door open, Pow2r Failure, Temperature variations.
• Sensor type - PT-100, 3 Wire, R WW.

Product Details:

Description:

• Password (Programmable) for Authorized Operation.
• Initial Self Cleaning Cycle.
• Real Time Clock.
• UV Timer.
• Total UV used Time.
• Total HEPA Filter run time.
• HEPA Filter Alarm after programmed hours with ON/OFF.
• HEPA Filter life display and alarm.
• Audio Visual Door Unsafe Alarm, if door is at incorrect operating height.
• Door Safe Position Alarm sounds if door is raised above correct operating height ( Sensor Model).
• U.V. Light in work chamber Inter Locked with Door & Fluorescent Lights i.e. it switches ON only when door is closed, and automatically switches OFF fluorescent lights. 30 minutes Auto Off Timer.

Product Details:

Description:

Steam Sterilizer  Controller, Two PT-100 Sensor and One Pressure Sensor.

Features:

• Display: JumboLCD 20x 4
• Control: ON/OFF / T.P.â
• Input: PT-100 for Boiler and chamber, Pressure Sensor for chamberPurging R ange : U ser Settable
•  Sterilization Time : User Settable
• Post Sterilization-Drying Time : User Settable
• Inlet for HEP A Filter
• Boiler Control: User Settable
• Buzzer: High / Low Alarm/Process End.
• Pressure Display with Transmitter Sterilization cycle process inbuilt.
• Low Water Sensor Built. 
• In Two Built in program and access key.
• Bowie & Dick Equipment control.
• Vacuum Pump Control.
• Solenoid Valve Control 3, 4, 5 & 6 Nos

Product Details:

Polymerase Chain Reaction (PCR) Workstation Model: Budget
• Password (Programmable) for Authorized Operation.• Initial Self Cleaning Cycle.• Real Time Clock.• UV Timer.• Total UV used Time.• Total HEPA Filter run time.• HEPA Filter Alarm after programmed hours with ON/OFF.• HEPA Filter life display and alarm.• Audio Visual Door Unsafe Alarm, if door is at incorrect operating height.• Door Safe Position Alarm sounds if door is raised above correct operating height ( Sensor Model).• U.V. Light in work chamber Inter Locked with Door & Fluorescent Lights i.e. it switches ON only when door is closed, and automatically switches OFF fluorescentlights. 30 minutes Auto Off Timer.

Product Details:

Biosafety Controller with Air Velocity and Differential Pressure 
Sensor cost Extra - Buy Online from Luxmed   
Biosafety Controller with Air Velocity and Differential PressureSensor cost Extra - Buy Online from Luxmed  Portal.• Password (Programmable) for Authorized Operation.• Built in differential Pressure display (mm WC I Pascal).• Air Velocity Display and set the safety parameters.• Initial Self Cleaning Cycle.• Real Time Clock.• UV Timer.• Total UV used Time.• Total HEPA Filter run time.• HEPA Filter Alarm after.programmed hours with ON/OFF.
Model: • Dual Sensor (Duo)Single Sensor (Uni)Without Sensor